Do you love to go fishing? Do you enjoy it even more when you actually catch fish? Garmin has two affordably-priced sonar fish locators that all avid fishermen should take a look at. With many of the features of top-end models, the Garmin 300c and 400c may just be what you're searching for to enhance your total fishing experience. Either model will let you to discover where the fish are, and discern the sizes of the fish. Although similar in many ways, there are a few subtle differences between the 300c and the 400c that you should be aware of before making a purchase.
Designed to work on both lakes and oceans, either of these designs would be a great addition to your fishing boat! The Garmin 300c is a 400-watt dual beam version and offers a wide fish-finding cone, reaching incredible depths of 900 feet (274.32 m). The 400c gives you the option of the dual beam or a 500-watt dual frequency transducer that lets you to reach a mind numbing depth of 1,500 feet (457.2 m). The dual-beam cone system has duel settings: 15 or 45 degrees emminating from the boat. The narrow beam uses a high frequency and, in turn, brings back high definition results. The wide beam uses a lower frequency, letting you see the contours of the bottom and fish that are not directly under the craft, although they will display at a lower definition. The dual frequency transducer, available on the 400c, can send out both high and low frequencies at the same time, so you can see both narrow and wide returns on the split screen.
Both of these Garmin Fish-finder models has a high-resolution, 256-color screen, that is easily readable even when in the direct sunlight. The only difference between the two is the size of the display screen: a 3.5-inch on the 300c and 4-inch on the 400c, both displaying 240x300 pixels. The crystal clear color readout makes it easy to distinguish fish from debri. A night mode allows low-light readability and a backlit keyboard makes it simple to operate at night.
Both the Garmin 300c and the 400c units have Ultrascroll, Fish Symbol ID, A-Scope, Auto Gain and Whiteline functions. Ultrascroll is a feature that moves the sonar from side to side at a high speed providing faster updates on the display and showing fish even while you are zipping across the water to a favorite fishing hole! Fish Symbol ID helps to distinguish between unsimilar sizes of fish so you are not going after guppies instead of salmon. A-Scope lets you to see a real-time display of fish passing through the transducer beam. Both of these fabulous sonars have an auto gain feature, which controls the sensitivity on the sonar depending on the density of the water, or fish. Whiteline interprets whether the bottom is hard or soft and allows you to distinguish different types of debris on the bottom. They also have alarms that can be set for various alerts: the presence of fish, low battery power, and shallow water - you get to set the alarm depth! Turn your alarms on and say adios to dead batteries and damaged propellers.
Split-screen capability allows you to take full advantage of instant information, such as water depth, temperature and speed (for river fishing) one side and instant fish traffic on the other side. Each unit has both 2x and 4x zoom functions for determining bottom density and/or fish size. An automatic save function for your preferred settings allows you to set your preferences one time and they will be save when you turn off the sonar. This saves having to reset your preferences during a fishing excursion that lasts more than one day.
The greatest difference between the two models is the CANet-compatibility of the Garmin 400c. CANet is a communication system that allows integration of data between the 400c and other Garmin chart plotters such as navigation systems on your boat, making the 400c a true part of your navigation system and not simply a delightful fish-finder. One satisfied customer said, "I own a Garmin GPSMap 496 and I use it together with my 400c. The two units work together very well. Even in the middle of the sea I can never get lost!" Another happy customer says, "I recently bought a Garmin Fishfinder and was very surprised to discover it works right alongside my GPS."
Designed to work on both lakes and oceans, either of these designs would be a great addition to your fishing boat! The Garmin 300c is a 400-watt dual beam version and offers a wide fish-finding cone, reaching incredible depths of 900 feet (274.32 m). The 400c gives you the option of the dual beam or a 500-watt dual frequency transducer that lets you to reach a mind numbing depth of 1,500 feet (457.2 m). The dual-beam cone system has duel settings: 15 or 45 degrees emminating from the boat. The narrow beam uses a high frequency and, in turn, brings back high definition results. The wide beam uses a lower frequency, letting you see the contours of the bottom and fish that are not directly under the craft, although they will display at a lower definition. The dual frequency transducer, available on the 400c, can send out both high and low frequencies at the same time, so you can see both narrow and wide returns on the split screen.
Both of these Garmin Fish-finder models has a high-resolution, 256-color screen, that is easily readable even when in the direct sunlight. The only difference between the two is the size of the display screen: a 3.5-inch on the 300c and 4-inch on the 400c, both displaying 240x300 pixels. The crystal clear color readout makes it easy to distinguish fish from debri. A night mode allows low-light readability and a backlit keyboard makes it simple to operate at night.
Both the Garmin 300c and the 400c units have Ultrascroll, Fish Symbol ID, A-Scope, Auto Gain and Whiteline functions. Ultrascroll is a feature that moves the sonar from side to side at a high speed providing faster updates on the display and showing fish even while you are zipping across the water to a favorite fishing hole! Fish Symbol ID helps to distinguish between unsimilar sizes of fish so you are not going after guppies instead of salmon. A-Scope lets you to see a real-time display of fish passing through the transducer beam. Both of these fabulous sonars have an auto gain feature, which controls the sensitivity on the sonar depending on the density of the water, or fish. Whiteline interprets whether the bottom is hard or soft and allows you to distinguish different types of debris on the bottom. They also have alarms that can be set for various alerts: the presence of fish, low battery power, and shallow water - you get to set the alarm depth! Turn your alarms on and say adios to dead batteries and damaged propellers.
Split-screen capability allows you to take full advantage of instant information, such as water depth, temperature and speed (for river fishing) one side and instant fish traffic on the other side. Each unit has both 2x and 4x zoom functions for determining bottom density and/or fish size. An automatic save function for your preferred settings allows you to set your preferences one time and they will be save when you turn off the sonar. This saves having to reset your preferences during a fishing excursion that lasts more than one day.
The greatest difference between the two models is the CANet-compatibility of the Garmin 400c. CANet is a communication system that allows integration of data between the 400c and other Garmin chart plotters such as navigation systems on your boat, making the 400c a true part of your navigation system and not simply a delightful fish-finder. One satisfied customer said, "I own a Garmin GPSMap 496 and I use it together with my 400c. The two units work together very well. Even in the middle of the sea I can never get lost!" Another happy customer says, "I recently bought a Garmin Fishfinder and was very surprised to discover it works right alongside my GPS."
About the Author:
Now I would like to invite you to learn even more about the wonderful world of Garmin 400c or about the Garmin 300c
0 comments:
Post a Comment